Trauma | October 2024

MatrixSTERNUM™ Fixation System

The MatrixSTERNUM™ Fixation System provides a low-profile plating solution for sternotomy and thoracotomy repair that is based upon the locked plating technology offered in the MatrixRIB Plating System. The system includes dedicated multi-hole screw guides that reduce the number of steps and intraoperative time required for plate placement and screw insertion by the surgeon.1

Fig 1 Sternal closure using a 3-plate MatrixSTERNUM construct.

The MatrixSTERNUM™ Fixation System is designed for strength, operating room efficiency, and ease of use. The system is proven to provide 3 times greater construct locking strength compared to the competition.2 In addition, multi-hole Screw Guides result in 43% faster screw insertion compared to the competition.1 The low-profile plates in the system are 1.5 mm thick for contourability and low palpability.

Fig 2 Plate fixation using the multi-hole speed guide.

References

  1. DePuy Synthes. MatrixSTERNUM Human Performance Evaluation – Time Study Protocol. 03/05/2024. Windchill#501503510
  2. DePuy Synthes. Engineering Rationale - Comparison of Performance of MatrixSTERNUM Plate-Screw Locking Strength to Competitive Plating System. 17/06/2024. Windchill#501986434.

You  might also be interested in

Disclaimer:

Hazards and labeling

Due to varying countries’ legal and regulatory approval requirements, consult the appropriate local product labeling for approved intended use of the products described on this website. All devices on this website are approved by the AO Technical Commission. For logistical reasons, these devices may not be available in all countries worldwide at the date of publication. 


Legal restrictions

This work was produced by AO Foundation, Switzerland. All rights reserved by AO Foundation. This publication, including all parts thereof, is legally protected by copyright.

Any use, exploitation or commercialization outside the narrow limits set forth by copyright legislation and the restrictions on use laid out below, without the publisher‘s consent, is illegal and liable to prosecution. This applies in particular to photostat reproduction, copying, scanning or duplication of any kind, translation, preparation of microfilms, electronic data processing, and storage such as making this publication available on Intranet or Internet.

Some of the products, names, instruments, treatments, logos, designs, etc referred to in this publication are also protected by patents, trademarks or by other intellectual property protection laws (eg, “AO” and the AO logo are subject to trademark applications/registrations) even though specific reference to this fact is not always made in the text. Therefore, the appearance of a name, instrument, etc without designation as proprietary is not to be construed as a representation by the publisher that it is in the public domain.

Restrictions on use: The rightful owner of an authorized copy of this work may use it for educational and research purposes only. Single images or illustrations may be copied for research or educational purposes only. The images or illustrations may not be altered in any way and need to carry the following statement of origin “Copyright by AO Foundation, Switzerland”.

Check www.aofoundation.org/disclaimer for more information.

 

If you have any comments or questions on the articles or the new devices, please do not hesitate to contact us

The brands and labels "approved by AO Technical Commission" and "approved by AO Foundation", particularly "AO" and the AO logo, are AO Foundation's intellectual property and subject to trademark applications and registrations, respectively. The use of these brands and labels is regulated by licensing agreements between AO Foundation and the producers of innovation products obliged to use such labels to declare the products as AO Technical Commission or AO Foundation approved solutions. Any unauthorized or inadequate use of these trademarks may be subject to legal action.