Cannulated Screw System CSS+
In December 2021 the AO Trauma Technical Commission approved the Next Generation Cannulated Screw System Plus (CSS+) which was designed and developed by the Foot and Ankle Expert Group in collaboration with the AO primary industrial partner, DePuy Synthes. New and patented cannulated screw tips address the clinical need for improved cutting performance and new Cobalt Chrome (CoCr) guidewires facilitate accurate screw insertion whilst minimizing guidewire deflection.
Ranging in diameter from 2.0–7.5 mm (with 0.5 mm diameter increments from 2.0– 4.5-, and 1.0-mm increments from 5.5–7.5), the color-coded screws are available in titanium with short and long partial thread as well as fully threaded (Fig 1). All implants are available in sterile and non-sterile packaging.
The Next Generation Cannulated Screw CSS+ is indicated for use in bone reconstruction, osteotomy, arthrodesis, joint fusion, fracture repair, and fracture fixation of bones appropriate for the size of the device. Color-coded instrumentation corresponding to its color-coded screw promotes ease of use and implantation.
The system is neatly divided into preconfigured sets—small, medium, and large. These sets house separate screw racks and instrument trays according to size, designed to enhance the efficiency of OR supply sourcing.
The new CSS+ screws and their associated instruments are the latest innovation from the AO Technical Commission. This new screw system will improve technical options for surgeons and enhance surgical outcomes.
You might also be interested in
FIBULINK Syndesmosis Repair System
The first adjustable syndesmotic repair system to enable precise, anatomical syndesmotic fixation.
VA-LCP Distal Fibula Plates in titanium
Line extension enhancing the VA-LCP Ankle Trauma 2.7/3.5 System and introduction of an anatomic tray for the USF System.
The MAXFRAME System has now been updated with a new Software release and additional Hardware.
The new Variable Angle Locking Patella Plating System
The Variable Angle Locking Patella Plating System was developed to reduce complication rates.
The new Variable Angle LCP Periprosthetic Proximal Femur Plating System
Developed to address various aspects in periprosthetic femoral fracture treatment.
Flexible Monobloc Reamers
To address clinical demands such as cutting performance and usability.
VA-LCP Clavicle Systems
The next generation of internal fixation for the clavicle and a solution for fractures and injuries.
Hazards and labeling
Due to varying countries’ legal and regulatory approval requirements, consult the appropriate local product labeling for approved intended use of the products described on this website. All devices on this website are approved by the AO Technical Commission. For logistical reasons, these devices may not be available in all countries worldwide at the date of publication.
This work was produced by AO Foundation, Switzerland. All rights reserved by AO Foundation. This publication, including all parts thereof, is legally protected by copyright.
Any use, exploitation or commercialization outside the narrow limits set forth by copyright legislation and the restrictions on use laid out below, without the publisher‘s consent, is illegal and liable to prosecution. This applies in particular to photostat reproduction, copying, scanning or duplication of any kind, translation, preparation of microfilms, electronic data processing, and storage such as making this publication available on Intranet or Internet.
Some of the products, names, instruments, treatments, logos, designs, etc referred to in this publication are also protected by patents, trademarks or by other intellectual property protection laws (eg, “AO” and the AO logo are subject to trademark applications/registrations) even though specific reference to this fact is not always made in the text. Therefore, the appearance of a name, instrument, etc without designation as proprietary is not to be construed as a representation by the publisher that it is in the public domain.
Restrictions on use: The rightful owner of an authorized copy of this work may use it for educational and research purposes only. Single images or illustrations may be copied for research or educational purposes only. The images or illustrations may not be altered in any way and need to carry the following statement of origin “Copyright by AO Foundation, Switzerland”.
Check www.aofoundation.org/disclaimer for more information.
If you have any comments or questions on the articles or the new devices, please do not hesitate to contact us.
The brands and labels "approved by AO Technical Commission" and "approved by AO Foundation", particularly "AO" and the AO logo, are AO Foundation's intellectual property and subject to trademark applications and registrations, respectively. The use of these brands and labels is regulated by licensing agreements between AO Foundation and the producers of innovation products obliged to use such labels to declare the products as AO Technical Commission or AO Foundation approved solutions. Any unauthorized or inadequate use of these trademarks may be subject to legal action.