DHS: 2.5mm & 2.8mm Guide Wire
The new 2.5 (for the DHS) and the 2.8 mm guide wire from L605 steel (for 7.3 cannulated screws) have 28% greater stiffness and a drill bit tip for easier insertion. Calibration simplifies measurement.
Coupling Screw and Guide Shaft Adaptor for DHS One-Step Lag Screw
This new device allows the use of standard DHS instrumentation to implant a One-Step Lag Screw. The Guide Shaft Adaptor for DHS One-Step Lag Screw fits into the truncated hex recess of a One-Step Lag Screw. The Coupling Screw Adaptor secures the Guide Shaft Adaptor to the One-Step Lag Screw. The standard DHS wrench then fits over the assembly for insertion. The plate is placed over the inserted Lag Screw as in standard DHS technique.
The Coupling Screw and Guide Shaft Adaptor enable clinics to upgrade their DHS systems to the Synthes DHS One-Step Lag Screw without needing to purchase new instrument sets.
Hazards and labeling
Due to varying countries’ legal and regulatory approval requirements, consult the appropriate local product labeling for approved intended use of the products described on this website. All devices on this website are approved by the AO Technical Commission. For logistical reasons, these devices may not be available in all countries worldwide at the date of publication.
This work was produced by AO Foundation, Switzerland. All rights reserved by AO Foundation. This publication, including all parts thereof, is legally protected by copyright.
Any use, exploitation or commercialization outside the narrow limits set forth by copyright legislation and the restrictions on use laid out below, without the publisher‘s consent, is illegal and liable to prosecution. This applies in particular to photostat reproduction, copying, scanning or duplication of any kind, translation, preparation of microfilms, electronic data processing, and storage such as making this publication available on Intranet or Internet.
Some of the products, names, instruments, treatments, logos, designs, etc referred to in this publication are also protected by patents, trademarks or by other intellectual property protection laws (eg, “AO” and the AO logo are subject to trademark applications/registrations) even though specific reference to this fact is not always made in the text. Therefore, the appearance of a name, instrument, etc without designation as proprietary is not to be construed as a representation by the publisher that it is in the public domain.
Restrictions on use: The rightful owner of an authorized copy of this work may use it for educational and research purposes only. Single images or illustrations may be copied for research or educational purposes only. The images or illustrations may not be altered in any way and need to carry the following statement of origin “Copyright by AO Foundation, Switzerland”.
Check www.aofoundation.org/disclaimer for more information.
If you have any comments or questions on the articles or the new devices, please do not hesitate to contact us.
“approved by AO Technical Commission” and “approved by AO Foundation”
The brands and labels “approved by AO Technical Commission” and “approved by AO Foundation”, particularly "AO" and the AO logo, are AO Foundation's intellectual property and subject to trademark applications and registrations, respectively. The use of these brands and labels is regulated by licensing agreements between AO Foundation and the producers of innovation products obliged to use such labels to declare the products as AO Technical Commission or AO Foundation approved solutions. Any unauthorized or inadequate use of these trademarks may be subject to legal action.